ESX Processing (USD)

An ESX file can now be created from any iGUIDE! Simply request the ESX file upon creation of a Standard or Premium iGUIDE and your file will be delivered within 48 hours. Accurate sketches are now just a few clicks away.*

iGuide - ESX Sample

iGUIDE Standard

Billable Area iGUIDE Processing ESX Processing Total
0-10,000 ft² $0.02 per ft² $0.02 per ft² $0.04 per ft²
10,000-30,0000 ft² $0.015 per ft² $0.015 per ft² $0.03 per ft²
30,000-100,0000 ft² $0.011 per ft² $0.011 per ft² $0.022 per ft²
100,000 ft² + $0.009 per ft² $0.009 per ft² $0.018 per ft²

iGUIDE Premium

Billable Area iGUIDE Processing ESX Processing Total
0-10,000 ft² $0.03 per ft² $0.02 per ft² $0.05 per ft²
10,000-30,0000 ft² $0.023 per ft² $0.015 per ft² $0.038 per ft²
30,000-100,0000 ft² $0.017 per ft² $0.011 per ft² $0.028 per ft²
100,000 ft² + $0.013 per ft² $0.009 per ft² $0.022 per ft²
Download Sample ESX

*ESX sketches provided by iGUIDE are intended to be used as a starting point for an estimate and may still require additional information. Please refer to the list below:

  • Walls: All walls are set to four inches.
  • Doors: Doors will match the horizontal dimension from Planitar Inc.’s proprietary drafting software but not the height. Door types will match the type represented in Planitar Inc.’s proprietary drafting software.
  • Windows: Windows will match the horizontal dimension from Planitar Inc.’s proprietary drafting software but not the height. All windows will be the standard type of window.
  • Room names/types: Room names will match the corresponding names from Planitar Inc.’s proprietary drafting software. Room types are selected from the Xactimate library to closely match the types used in Planitar Inc.’s proprietary drafting software.
  • Open to below: Spaces that are open to below are marked with an area and set as a hole, thus removing the floor area.
  • Stairs between floors: Stairs are shown the full length, only going up to the floor above. The run will match the length of the stairs in Planitar Inc.’s proprietary drafting software. The rise and number of risers will not be changed to match Planitar Inc.’s proprietary drafting software.
  • Steps that don’t separate floors: Single steps will align to room separations. Two or more steps will be shown as a staircase, but the two floor elevations on either side of the steps will not change.
  • Rooms under stairs: Any room that is documented in Planitar Inc.’s proprietary drafting software that is under a set of stairs going up, will be created on a separate floor that inlines with the corresponding floor to account for the floor area under the stairs.
  • Ledges: This feature will not be shown in the ESX file.
  • Restricted heights: Roof features will not be shown in the ESX file. The areas of restricted height will be separated with room dividers.
  • Bay windows: Bay windows will be represented as a small room with the exterior walls following the exterior walls around the window.
  • Premium fixtures: This feature will not be shown in the ESX file.
  • Structural objects: Any Columns that are not attached to a wall will be represented as an annotated shape in the ESX file.
  • 3D features: Anything that can not be represented in Planitar Inc.’s proprietary drafting software 2D plan, will not be shown in the ESX file.
  • Multi floor buildings: Different floors will be separated in the ESX file, with a standard elevation change of nine feet. Floors will be slightly offset from one another. Floors will not be vertically aligned.
  • Ceilings: Details and/or construction will not be specified/shown in the ESX file.
  • Roof: Details and/or construction will not be specified/shown in the ESX file.
  • Floors: Construction will not be specified in the ESX file.
  • File completeness: Only a Sketch will be provided, the Claim Info, Estimate Items, Photos, and Documents will not be completed.