iGuideHelp Center

Stitch Drawing Tool

Updated

Overview

The Drawing Tool lets you add reference lines over the laser data to guide alignment, and the Notes tool lets you leave messages for the drafting team. Reference lines stay in your project but are not exported in the .tar file.

In This Article

Use the Drawing Tool

  1. Turn on the tool from the toolbar or by pressing L.
  2. Hold Shift to show yellow guide lines while drawing.
  3. Click once to start a line, then click again to finish it. Repeat as needed.
  4. To remove lines, hold Ctrl/Cmd and drag to select multiple reference lines, then press Delete.

Note: Reference lines stay in the project but are not exported in the .tar file. Lines stay visible across floors when you use the underlay floor view. See Stitch Floor View Settings.

Stitch Drawing Tool: Use the Drawing Tool

Add Notes for Drafters

  1. Use the Notes tool to add on-screen messages in the laser data area.
  2. Use notes for instructions, room naming requests, or to flag issues for the drafting team.

Still need help?

Call us at 1-855-505-1723 or send our support team a request.

Submit a request

Return to top ↑