Can I have DWG in Metric as well as Imperial measurements?
iGUIDE DWG floor plans can be set to Metric or Imperial units and will scale correctly.
iGUIDE DWG floor plans can be set to Metric or Imperial units and will scale correctly.
The scale is set to 1:1. If you would like to adjust the scale you will have to do that manually in your CAD software
iGUIDE DWG Floor Plans are suited for residential and commercial properties of all sizes.
Acceptable tolerance for wall thicknesses is + or – 1/2”. This information is based upon the maximum dimensions of each room and will have an effect on room dimensions. Room dimensions can also vary. Acceptable tolerance is + or – 1/4”.
DWG Floor Plans are billed at $0.02/ft² USD. This is on top of the processing fee for a Standard or Premium iGUIDE which is between $0.02/ft² and $0.03/ft² USD respectively. This brings the total cost of DWG Floor Plans to between 0.04/ft² and 0.05/ft² for properties up to 10,000ft².
The iGUIDE DWG floor plan does not contain any 3D data.
Simply request the DWG file upon creation of a Standard or Premium iGUIDE and your file will be delivered within 48 hours. Excluding Sundays, holidays, and outside office hours (Mon-Fri 9 am-5 pm ET).
iGUIDE DWG Floor Plans are more detialed than iGUIDEs DXF floor plans. The DWG has additional features such as AIA Layers, door types, and partial floor-to-floor alignment.
Feature Standard Premium 48 hr Processing Time ✔️ ✔️ Wall Types & Placement ✔️ ✔️ Wall Sizes at ½” Tolerances ✔️ ✔️ Door Types & Placement ✔️ ✔️ Windows Placement ✔️ ✔️ Stairs ✔️ ✔️ Structural Elements ✔️ ✔️ AIA Layers ✔️ ✔️ Partial Floor to Floor Alignment ✔️ ✔️ Room Labels ✔️ Room Areas [...]
All previously created iGUIDEs can have the DWG Floor Plan add-on. There are key differences between Premium and Standard iGUIDEs when creating the DWG. The differences can be seen here.